Smart meters can generate a Push message in case of power fail. This event is called Last Gasp.
October 19, 2023
Posted on
Practical Use of Load Profiles
Electronic energy meters can save internally a lot of data. When this data are saved periodically with time stamp, we talk about a load profile.
December 19, 2023
Posted on
The TOU Tariff Structure
TOU stands for time of use. It's getting popular together with smart energy meters and advanced metering infrastructure (AMI).
December 29, 2023
Posted on
Energy Meters and Tariffs
Electronic energy meters are recording the actual power over a certain time. The microprocessor inside of these meters allows all kind of additional calculations.
December 29, 2023
Posted on
Sealing of Energy Meters
Electrical Energy meters are sealed to detect possible manipulations. The utility field workers check the meter installations regular.
October 5, 2023
Posted on
Optical Communication Head CL4S
The optical probe CL4S is used for local communication with electrical energy meters. It's compliant with the IEC 62056-21 . The communication is galvanically isolated.
January 5, 2024
Posted on
Sealing of Optical Ports
The optical port is for local communication with energy meters. With suitable software and an optical reading head you can access to the meter for reading and writing certain parameters.
January 4, 2024
Posted on
Principle for Accuracy Testing of Energy Meters
Now meter testing is much more comfortable. Actually you only need to put the meters on the rack. For testing big quantities of meters a robot can also do the job.
But what happens inside?
March 4, 2024
Posted on
Three Phase Meter CL730S23
The CL730S23 is a static three-phase revenue meter designed for residential and small commercial consumers.
January 6, 2024
Posted on
Basics of Energy Meter Accuracy Tests
In the past without any electronics a accuracy test was really challenging. You needed a voltage/current source with a high stability, calibrated wattmeters and a calibrated stop-watch.
January 7, 2024
Posted on
How does a scanning head work?
Each energy meter used for billing must have a test output. An optical indication is mandatory. Beside this the meter can also have electrical test outputs.