ALL ARTICLES CATEGORIZED IN: CATEGORY: METERING BLOG
Category: Metering Blog
December 29, 2023
Posted on
Sealing of Energy Meters
Electrical Energy meters are sealed to detect possible manipulations. The utility field workers check the meter installations regular.
January 5, 2024
Posted on
Sealing of Optical Ports
The optical port is for local communication with energy meters. With suitable software and an optical reading head you can access to the meter for reading and writing certain parameters.
January 4, 2024
Posted on
Principle for Accuracy Testing of Energy Meters
Now meter testing is much more comfortable. Actually you only need to put the meters on the rack. For testing big quantities of meters a robot can also do the job.
But what happens inside?
January 6, 2024
Posted on
Basics of Energy Meter Accuracy Tests
In the past without any electronics a accuracy test was really challenging. You needed a voltage/current source with a high stability, calibrated wattmeters and a calibrated stop-watch.
January 7, 2024
Posted on
How does a scanning head work?
Each energy meter used for billing must have a test output. An optical indication is mandatory. Beside this the meter can also have electrical test outputs.
February 21, 2024
Posted on
The Principle of Three-Phase Generators
We have a nice three phase power supply in our home, but where does it come from? And why does the waveform has a sine shape?
December 26, 2023
Posted on
Accelerated Life Test for Energy Meters
There are several ways to predict the reliability of an energy meter. The IEC provides a series of standards related to reliability tests or evaluations.
December 27, 2023
Posted on
How does Net metering work?
When you are generating power by solar or wind, you might produce more energy than you actually need.
November 14, 2023
Posted on
Is there a Lifetime Calibration?
Electronic energy meters are adjusted for life-time. A recalibration has to be done by country rules and regulations.
December 26, 2023
Posted on
What will be the recorded demand?
What will be the recorded demand if a constant load of 1 kW is applied through a 30 minute demand meter ?
April 2, 2024
Posted on
How to get a Clear Tamper Token?
A clear tamper token is required to unlock a STS meter showing the tamper sign. Only the local power company can issue this token code.
November 20, 2023
Posted on
What is a Load-Switch?
A latching relay keeps its contact position indefinitely without power applied to the coil.